Podrobnosti návrhu

Číslo:prEN 1829-1:2018
Komise:CEN/TC 197
Název komise:Pumps
Návrh uveřejněn:3.09.2018
K připomínkám do:22.10.2018
Oblast zaměření:Čerpadla
Contact email:cermak(at)agentura-cas.cz

This document contains safety-related requirements for high pressure water jet machines with drives of all kinds (e.g. electric motor, internal combustion engine, air and hydraulic) in which pumps are used to generate pressure. This document deals with all significant hazards, hazardous situations and events arising during assembly, erection, operation and servicing relevant to high pressure water jet machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). All references to high pressure water jet machines within this document includes machines for one or more of the following industrial applications:

—    cleaning;

—    surface preparation;

—    material removal;

—    readjustment of concrete;

—    cutting.

This document applies to mobile and fixed high pressure water jet machines, in which the water pressure is generated by a pressure generator/pump and in which the maximum allowable working pressure is more than the upper limit fixed in the scope of EN 60335‑2‑79.

NOTE 1       35 MPa (350 bar) is currently the upper limit for machines covered by EN 60335‑2‑79.

NOTE 2       In general the machines in the scope will not be in the scope of the Pressure Equipment Directive 2014/68/EU. In some cases, specific parts may be in the scope of that directive, but their application is not dealt with in this document.

This document does not apply to high pressure cleaners which are dealt with in EN 60335‑2‑54 and EN 60335‑2‑79.

NOTE 3       EN 60335‑2‑54 applies to steam cleaners for household use. EN 60335‑2‑79 applies to high pressure cleaners having a rated pressure not less than 2,5 MPa and not exceeding 35 MPa, as well as steam cleaners and those parts of hot water high pressure cleaners incorporating a steam stage which have a capacity not exceeding 100 l, a rated pressure not exceeding 2,5 MPa and a product of capacity and rated pressure not exceeding 5 MPa·l.

This document does not cover additional hazards due to the incorporation of high pressure water jet machines into other process-technology machines.

This document does not cover specific hazards associated with explosive atmospheres, use on ships or ambient temperatures outside the range 5 °C to 40 °C.

This document does not cover hazards associated with the drives or specific hazards due to any heat generation function. However, the hazards due to high temperatures of touchable surfaces are dealt with.

Any hazard due to the nature of liquids used for jetting, other than that due to pressure, is excluded from the scope of this document.

This document is not applicable to high pressure water jet machines which are manufactured before the date of its publication as EN.

Tests according to this standard are type tests.

NOTE 4       Routine tests are described in Annex D.

Tento dokument můžete připomínkovat po jednotlivých částech  - stačí u příslušné části dokumentu vyplnit formulář v souladu s pokyny a kliknout na ‚Odeslat připomínku‘.

Prosíme, nepoužívejte vulgární výrazy a nevyužívejte tento prostor pro umisťování reklamy.