Obuv (kromě ochranné obuvi)

Oblast zaměření: Obuv (kromě ochranné obuvi)
Komise : CEN/TC 309 (Footwear)
Původce: CEN
K připomínkám do: 13.12.2019
Zobraz více Zobraz méně
 

This standard describes a method for determining the attachment strength of footwear upper straps joined to the sole, upper decorations, hooks, eyelets and trims.

Oblast zaměření: Obuv (kromě ochranné obuvi)
Komise : CEN/TC 309 (Footwear)
Původce: CEN
K připomínkám do: 13.12.2019
Zobraz více Zobraz méně
 

This standard describes a method for determining the attachment pull-out strength of heel top pieces.

Oblast zaměření: Obuv (kromě ochranné obuvi)
Komise : CEN/TC 309 (Footwear)
Původce: CEN
K připomínkám do: 13.12.2019
Zobraz více Zobraz méně
 

This International Standard specifies two test methods for the determination of the flexing durability of whole shoes. The two methods may not give comparable results.

These methods are not applicable to the whole shoes with heel height more than 70 mm, or the thickness of flexing area of the soles more than 25 mm, or flexing angle less than 45° according to ISO 17707:2005, Clause 6 rigidity test.

Oblast zaměření: Obuv (kromě ochranné obuvi)
Komise : CEN/TC 309 (Footwear)
Původce: CEN
K připomínkám do: 13.12.2019
Zobraz více Zobraz méně
 

This Standard specifies a method for the determination of the rubbing resistance of leather and synthetic materials using rubber.

The method is aimed to establish testing conditions that are similar to those of the practical use of footwear subjected to drastic stress, as is the case of hiking or children’s footwear, where the upper of one of the shoes is expected to rub with the sole of the other. This method is applicable to all types of leather and synthetic materials intended for shoe uppers.

Oblast zaměření: Obuv (kromě ochranné obuvi)
Komise : CEN/TC 309 (Footwear)
Původce: CEN
K připomínkám do: 5.01.2020
Zobraz více Zobraz méně
 

This method determines the coefficient of friction between footwear and floorings under conditions simulating those experienced in the phases of a typical walking step when slip is most likely to occur.

The method is applicable to all types of footwear, excepting professional footwear (EPI), outsole units, heel top pieces (top lifts) and sheet soling materials.