Doprava, mechanická manipulace a balení

Komise : CEN/TC 256 (Railway applications)
Původce: CEN
K připomínkám do: 27.11.2018
Zobraz více Zobraz méně
 

This part of EN 45545 specifies the reaction to fire performance requirements for materials and products used on railway vehicles as defined in EN 45545-1.

The operation and design categories defined in EN 45545-1 are used to establish hazard levels that are used as the basis of a classification system.

For each hazard level, this part specifies the test methods, test conditions and reaction to fire performance requirements.

It is not within the scope of this European Standard to describe measures that ensure the preservation of the vehicles in the event of a fire.

Oblast zaměření: Balicí stroje
Komise : CEN/TC 146 (Packaging machines - Safety)
Původce: CEN
K připomínkám do: 3.12.2018
Zobraz více Zobraz méně
 

and seal machines and auger fillers, volumetric cup fillers, nett weighers and multi-head weighers which are frequently fitted to these machines.

Form fill and seal machines:

—    flow wrapping machine;

—    vertical form, fill and seal machine;

—    horizontal sachet form, fill and seal machine;

—    thermoform, fill and seal machine;

—    tubular bag form, fill and seal machine;

—    mandrel form, fill and seal machine.

Fill and seal machines:

—    pre-made bag, erect, fill and seal machine;

—    cup or tub fill and seal machine;

—    sack fill and seal machine.

Filling machines commonly fitted to form, fill and seal machines and fill and seal machines:

—    auger filler;

—    volumetric cup filler;

—    nett weigher;

—    multi-head weigher.

Other types of form, fill and seal machine which are described in 3.3 have similar hazards to these machines and Clause 4 indicates which clauses of this standard are applicable to these machines.

This document covers the safety requirements for machine design, construction and all phases of life of the machines including installation, commissioning, operation, adjustment, maintenance and cleaning.

This document applies to machines manufactured after the date of issue of this document.

Exclusions

This standard does not apply to:

—    blow mould fill and seal machines;

—    bulk container fill and seal machines;

—    cartoning machines;

—    food depositors, including volumetric piston depositors;

—    thermoforming machines.

This document does consider hazards due to dust from the products being packed in these machines and modified atmosphere gases, but does not consider other hazards caused by the product being packed.

Oblast zaměření: Kovové a plastické kontejnery
Komise : CEN/TC 266 (Thermoplastic static tanks)
Původce: CEN
K připomínkám do: 3.12.2018
Zobraz více Zobraz méně
 

This document specifies the product characteristics and the corresponding test methods for static thermoplastic tanks made of:

—    blow moulded polyethylene, or

—    rotationally moulded polyethylene, or

—    rotationally moulded anionically polymerized polyamide 6,

with or without factory assembled reinforcement.

The products covered by this European Standard:

—    are intended to be used for internal or external installations, for above ground storage of fuels limited to kerosene, heating oil, diesel, fatty acid methyl ester (FAME) and bioliquids (containing up to 15 % FAME);

—    have a maximum filling capacity from 400 l up to and including 10 000 l, except for those made of anionically polymerized polyamide 6 where the maximum filling capacity will be limited to 3 000 l;

—    are subject to atmospheric pressure but not to any external loading (e.g. installation, wind and snow, earthquakes, flooding);

—    are not manufactured using recycled thermoplastic material;

—    are not manufactured using regrind thermoplastic material for rotationally moulded tanks;

—    are not manufactured using more than 50 % of regrind thermoplastic material for blow moulded tanks.

This document does not include tanks for the transport and distribution of fuels or gasses, or tanks for the storage of gas.

Flammable fuels with a flash point > 55 °C as determined by EN ISO 2719:2016 are eligible for storage in the tanks described in this standard without further provisions.

Flammable fuels with a flash point ≤ 55 °C as determined by EN ISO 2719:2016 are also eligible for storage in the tanks described in this standard if the provisions concerning electrostatic behaviour according to CLC/TR 60079‑32‑1:2015 are fulfilled.

Oblast zaměření: Kovové a plastické kontejnery
Komise : CEN/TC 226 (Thermoplastic static tanks)
Původce: CEN
K připomínkám do: 3.12.2018
Zobraz více Zobraz méně
 

This document specifies requirements for new traffic cones and new traffic cylinders with retroreflective properties.

This document specifies minimum essential visual and physical performance characteristics; test methods for determination of product performance and the means by which this performance may be communicated to the user and the public including safety enforcement agencies.

The document provides a series of categories or classes by which a traffic cone or traffic cylinder may be specified for use in different applications in accordance with best practice.

In the case of physical properties, performance levels and indicative tests are provided for cold weather, stability, and impact resistance when dropped. Requirements for visual recognition properties, colour, retro-reflectivity and luminance are provided.

Provision for identification and marking to declared levels of performance is provided.

There are other product shapes which perform similar functions. This document does not cover devices made in other shapes, or which do not meet the design requirements of this document.

Oblast zaměření: Letectví a kosmonautika
Komise : CEN/CLC/JTC 5 (Space)
Původce: CEN
K připomínkám do: 3.12.2018
Zobraz více Zobraz méně
 

This document defines the primary space debris mitigation requirements applicable to all elements of systems launched into, or passing through, near-Earth space, including launch vehicle orbital stages, operating spacecraft and any objects released as part of normal operations or disposal actions.

The requirements contained in this document are intended to reduce the growth of space debris by ensuring that spacecraft and launch vehicle orbital stages are designed, operated and disposed of in a manner that prevents them from generating debris throughout their orbital lifetime.

This document is the top-level standard in a family of standards addressing debris mitigation. It will be the main interface for the user, bridging between the primary debris mitigation requirements and the lower-level implementation standards that will ensure compliance.

This document does not cover launch phase safety for which specific rules are defined elsewhere.

This document identifies the clauses and requirements modified with respect to ISO 24113, Space systems — Space debris mitigation requirements, Second edition 2011-05-15 for application in ECSS.