Dveře a okna

Oblast zaměření: Dveře a okna
Komise : CEN/TC 33 (Doors, windows, shutters, building hardware and curtain walling)
Původce: CEN
K připomínkám do: 5.11.2019
Zobraz více Zobraz méně
 

This document specifies the method to be used to verify the mechanical performance of the bonded glazing for doors, windows and curtain walling (see examples in Annex A) and its durability. The bonding covered is only that between the glass and the metal surface.

NOTE 1       Bonded glazing was formerly known as structural sealant glazing SSGS.

This document covers bonded glazing incorporated into the product construction works as follows:

—    either vertically; or

—    up to 83° from the vertical (positive slope); or

—    up to 15° from the vertical onto the building face (negative slope).

NOTE 2       A wall has a positive slope if its outer surface faces upwards.

NOTE 3       Specific additional safety provisions can apply nationally.

This document gives information to the manufacturer to comply with requirements regarding design, factory production control and assembly rules.

The parts concerned in the testing are the metal surface (anodized and coated aluminium, stainless steel), the glass coated or not which shall be bonded, the bonding sealant and mechanical restraints when required.

This document does not apply to:

—    other surfaces materials;

—    direct glazing;

—    glass-to-glass bonding and edge seal of insulating glass units (which are covered by EN 13022‑1 and EN 1279‑5);

—    adhesive tapes.

Oblast zaměření: Dveře a okna
Komise : CEN/TC 33 (Doors, windows, shutters, building hardware and curtain walling)
Původce: CEN
K připomínkám do: 12.11.2019
Zobraz více Zobraz méně
 

This document specifies product characteristics and test methods of mechanically operated multipoint locks and their locking plates:

a)     for use in doors in buildings;

b)    for use on fire and smoke compartmentation doors fitted with door closing devices, to enable such doors to close reliably and thus achieve self-closing in the event of fire;

c)     for use on locked fire doors to maintain the fire integrity of the door assembly.

This document covers multipoint locks their locking plates which are either manufactured and placed on the market in their entirety by one producer or assembled from sub-assemblies produced by more than one producer and designed to be used in combination.

This document does not cover assessment of the contribution of the product to the fire resistance of specific fire resistance and/or smoke control door set assemblies.

This document is not applicable to mechanical/electromechanical cylinders, handles, locks for windows, padlocks, locks for safes, furniture locks or prison locks.

This document does not specify mechanically operated locks or their locking plates which are specified by EN 12209.

Oblast zaměření: Dveře a okna
Komise : CEN/TC 33 (Doors, windows, shutters, building hardware and curtain walling)
Původce: CEN
K připomínkám do: 12.11.2019
Zobraz více Zobraz méně
 

This document specifies product characteristics and test methods of mechanically operated locks and their locking plates:

a)     for use in doors in buildings;

b)    for use on fire and smoke compartmentation doors fitted with door closing devices, to enable such doors to close reliably and thus achieve self-closing in the event of fire;

c)     for use on locked fire doors to maintain the fire integrity of the door assembly.

This document covers mechanically operated locks, their locking plates which are either manufactured and placed on the market in their entirety by one producer or produced by more than one producer, or assembled from sub-assemblies produced by more than one producer and designed to be used in combination.

This document does not cover assessment of the contribution of the product to the fire resistance of specific fire resistance and/or smoke control door set assemblies.

This document is not applicable to mechanically/electromechanically cylinders, handles, locks for windows, padlocks, locks for safes, furniture locks or prison locks.

This document does not specify multipoint locks or their locking plates which are specified by prEN 15685.